REAR COMBINATION LIGHT ASSEMBLY(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  3. REMOVE LUGGAGE COMPARTMENT FLOOR CARPET

    Click here

  4. REMOVE REAR FLOOR BOARD SPACER

    Click here

  5. REMOVE REAR NO. 6 FLOOR BOARD SPACER

    Click here

  6. REMOVE ROPE HOOK ASSEMBLY

    Click here

  7. REMOVE REAR FLOOR FINISH PLATE

    Click here

  8. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

    Click here

  9. REMOVE REAR COMBINATION LIGHT LENS AND BODY LH


    1. A004T53E02
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear combination light lens and body LH.

    2. Disconnect the connector.

    3. Remove the 3 nuts.

    4. Detach the clip and remove the rear combination light lens and body LH.

  10. REMOVE REAR COMBINATION LIGHT BODY GASKET LH


    1. Remove the rear combination light body gasket LH.

      Note

      Be sure to remove the gasket completely from the body.

  11. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A004O9Y

      Turn the rear combination light bulb holder LH in the direction indicated by the arrow in the illustration and remove the socket.

    2. Remove the rear turn signal light bulb from the rear combination light bulb holder LH.

  12. REMOVE REAR COMBINATION LIGHT BULB HOLDER LH


    1. A004RIB

      Detach the clamp and 2 claws.

    2. Detach the guide and remove the rear combination light bulb holder LH.

    3. Disconnect the connector.