REAR COMBINATION LIGHT ASSEMBLY(for Sedan) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT GASKET


    1. Remove the rear combination light gasket.

      Note

      The gasket must not be reused.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A004O9Y

      Turn the bulb socket in the direction indicated by the arrow in the illustration and disconnect the bulb socket.

    2. A004OGT

      Push the rear turn signal light bulb in the direction indicated by the white arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.

      Text in Illustration
      A004NAK Push
      A004PZH Counterclockwise