AUTOMATIC HIGH BEAM SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE AUTOMATIC HIGH BEAM SYSTEM

   Tech Tips

   The following items can be customized.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Record the current settings before customizing.

   
   

   1. Customizing with the GTS.

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / (desired system).

      5. Select the setting by referring to the table below.

         Light Control

         Display	Default	Content	Setting	Relevant ECU
         Automatic High Beam	ON	A function that enables or disable the automatic high beam	ON or OFF	Main body ECU (Instrument panel junction block assembly)