LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting.

    5. Select the setting by referring to the table below.

      Light Control
      Display Default Content Setting
      Sensitivity Normal A function to adjust the ambient light sensitivity of the automatic light control system.* Normal, Dark2, Dark1, Light1 or Light2
      Follow Me Home Lighting Time 30 s Changes the low beam headlight lighting time when ignition switch is off and light control switch is pulled to flash headlights once. 30 s, 60 s, 90 s or 120 s

      Tech Tips

      The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

      Figure 1. *

      A004S5NE31

      Tech Tips

      When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Radio and Display Type)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.


    1. Turn the ignition switch to ON.

    2. Enter the following menus: Setup / Vehicle.

    3. Select the setting by referring to the table below.

      Light Control
      Display Default Content Setting
      Light sensor sensitivity

      0

      (middle bar)

      		 A function to adjust the ambient light sensitivity of the automatic light control system.* -2, -1, 0, +1 or +2

      Tech Tips

      The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

      Figure 2. *

      A004S5NE32
      *a System Setting
      *b Dark
      *c Light
      *d Setting

      Tech Tips

      When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.