LIGHTING SYSTEM DATA LIST / ACTIVE TEST
-
DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
-
Connect the intelligent tester to the DLC3.
-
Turn the ignition switch to ON.
-
Turn the intelligent tester on.
-
Enter the following menus: Body or Chassis / (desired) / Data List.
-
According to the display on the intelligent tester, read the Data List.
Main Body Tester Display Measurement Item/Range Normal Condition Diagnostic Note D Door Courtesy SW Driver side door courtesy light switch signal / ON or OFF ON: Driver side door courtesy light switch on
OFF: Driver side door courtesy light switch off
- P Door Courtesy SW Front passenger side door courtesy light switch signal / ON or OFF ON: Front passenger side door courtesy light switch on
OFF: Front passenger side door courtesy light switch off
- Dimmer SW Dimmer switch signal / ON or OFF ON: Dimmer switch on
OFF: Dimmer switch off
- Passing Light SW Passing light switch signal / ON or OFF ON: Passing light switch on
OFF: Passing light switch off
- Front Fog Light SW*1 Front fog light switch signal / ON or OFF ON: Front fog light switch on
OFF: Front fog light switch off
- Rear Fog Light SW Rear fog light switch signal / ON or OFF ON: Rear fog light switch on
OFF: Rear fog light switch off
- Auto Light SW*3 Auto light switch signal / ON or OFF ON: Auto light switch on
OFF: Auto light switch off
- Head Light SW (Head) Headlight switch signal / ON or OFF ON: Headlight switch on
OFF: Headlight switch off
- Head Light SW (Tail) Taillight switch signal / ON or OFF ON: Taillight switch on
OFF: Taillight switch off
- Parking Brake SW Parking brake switch signal / ON or OFF ON: Parking brake switch on
OFF: Parking brake switch off
- Sensitivity Automatic light control system sensitivity / Dark1, Dark2, Normal, Light1, Light2 Customize setting displayed - DRL Function*2 DRL function / ON or OFF Customize setting displayed - Response Time*3 Auto headlight response time signal / 0.1 s or 1.0 s 0.1 s: Auto headlight response time 0.1 seconds
1.0 s: Auto headlight response time 1.0 seconds
- *1: w/ Front Fog Light
*2: w/ Daytime Running Light System
*3: w/ Automatic Light Control System
AFS Tester Display Measurement Item/Range Normal Condition Diagnostic Note Traveling Direction Traveling direction / Not Fwd or Fwd Not Fwd: Shift lever in R
Fwd: Shift lever not in R
- Engine Engine condition / Run or Stop Run: Engine running
Stop: Engine stopped
- +B Headlight swivel ECU power source voltage/Min.: 0 V, Max.: 19.75 V 11 to 14 V - Steering Sens Signal Steering angle sensor signal value / -384° to 382.5° Current condition displayed - Steering Sens Center Pos Steering angle sensor center position / -3072° to 3070.5° Current condition displayed - FR Wheel Speed Front right wheel speed / 0 to 327.67 km/h (0 to 196.60 mph) Current condition displayed - FL Wheel Speed Front left wheel speed / 0 to 327.67 km/h (0 to 196.60 mph) Current condition displayed - Vehicle Speed Vehicle speed / 0 to 327.67 km/h (0 to 196.60 mph) Current condition displayed - # Codes Number of trouble codes / 0 to 255 Current condition displayed - Height Sens Pw Supply Val Height control sensor power supply value / Min.: 0 V, Max.: 5 V Approximately 5 V - Rr Height Sens Signal Val Rear height control sensor signal / Min.: 0 V, Max.: 5 V Changes according to vehicle height - ABS/VSC/TRC Tester Display Measurement Item/Range Normal Condition Diagnostic Note Stop Light Relay Stop light control relay ON: Stop light on
OFF: Stop light off
- EBS Relay Stop light relay (EBS operation) ON: Stop light blinking
OFF: Stop light off
-
-
-
ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
-
Connect the intelligent tester to the DLC3.
-
Turn the ignition switch to ON.
-
Turn the intelligent tester on.
-
Enter the following menus: Body or Chassis / (desired) / Active Test.
-
According to the display on the intelligent tester, perform the Active Test.
Main Body Tester Display Test Part Control Range Diagnostic Note Daytime Running Light*1 DRL illumination operation ON/OFF - Taillight Relay Taillight ON/OFF - Headlight Relay Headlight ON/OFF - Head Light Hi Headlight (High) ON/OFF - Front Fog Light Relay*2 Front fog light ON/OFF - Rear Fog Light Relay Rear fog light ON/OFF - *1: w/ Daytime Running Light System
*2: w/ Front Fog Light
AFS Tester Display Test Part Control Range Diagnostic Note Drive The Leveling Motor UP Leveling motor upward operation UP/OFF - Drive The Leveling Motor DOWN Leveling motor downward operation DOWN/OFF - Drive Swivel Motor RH RIGHT Swivel motor RH right direction rotation RIGHT/OFF - Drive Swivel Motor RH LEFT Swivel motor RH left direction rotation LEFT/OFF - Drive Swivel Motor LH RIGHT Swivel motor LH right direction rotation RIGHT/OFF - Drive Swivel Motor LH LEFT Swivel motor LH left direction rotation LEFT/OFF - AFS OFF Indicator AFS OFF indicator ON/OFF - ABS/VSC/TRC Tester Display Test Part Control Range Diagnostic Note EBS Relay Stop light ON/OFF - Stop Light Relay* Stop light ON/OFF -
-
*: for Automatic Transaxle
-
-