WIPER SWITCH REMOVAL

PROCEDURE


  1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  2. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LOWER NO. 2 STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)

    Click here

  5. REMOVE LOWER STEERING COLUMN COVER


    1. for Manual Tilt and Manual Telescopic Steering Column:


      1. Remove the lower steering column cover Click here.

    2. for Power Tilt and Power Telescopic Steering Column:


      1. Remove the lower steering column cover Click here.

  6. REMOVE UPPER STEERING COLUMN COVER


    1. for Manual Tilt and Manual Telescopic Steering Column:


      1. Remove the upper steering column cover Click here.

    2. for Power Tilt and Power Telescopic Steering Column:


      1. Remove the upper steering column cover Click here.

  7. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A004OIF

      Disconnect the 2 connectors.

    2. Detach the claw and remove the windshield wiper switch assembly.

      Note

      If the claw is pushed with excessive force, it may break.