REAR WIPER RUBBER REMOVAL

PROCEDURE

1. REMOVE REAR WIPER BLADE

   
   

   1. 

      Raise the wiper arm and then rotate the wiper blade to the position where the claw detaches with a "click" sound, as shown in the illustration.

      Note

      Be careful not to damage the claw.

   2. 

      Pull the wiper blade straight toward the left side of the vehicle to remove it from the wiper arm.

      Note

      Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.

2. REMOVE REAR WIPER RUBBER

   
   
   1. 

      *1	Lightly Push (Grip)
      *2	Lift
      *3	Stopper (Rear End of Blade)
      *4	Pull

      Lift and pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration.

      Note

      Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.

      Tech Tips

      Lightly pushing the rubber between the ends and middle allows it to be removed more easily.

   2. Remove the 2 backing plates.