FRONT DOOR WINDOW FRAME MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

  • When installing the window frame moulding, heat the vehicle body and window frame moulding using a heat light.

Standard
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Window Frame Moulding 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body and window frame moulding excessively.

PROCEDURE


  1. INSTALL FRONT DOOR FRONT WINDOW FRAME MOULDING LH


    1. Install a nose piece to an air riveter or hand riveter.

    2. Insert the mandrel part of a new rivet into the nose piece.

    3. Using the riveter, install the front door front window frame moulding as shown in the illustration.

      Tech Tips

      If the rivet cannot be cut, pull it once and cut it.

      A004UA4

      Note


      • A004RW4E67
        *1 INCORRECT
        *2 Riveter
        *3 Mandrel
        *4 CORRECT

        Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

      • A004RNQE02
        *1 Riveter
        *2 INCORRECT
        *3 CORRECT

        Confirm that the rivets are seated properly against the front door front window frame moulding.

      • Do not tilt the riveter when installing the rivet to the front door front window frame moulding.

      • Do not leave any space between the rivet head and front door front window frame moulding.

      • A004PZTE02
        *1 Riveter
        *2 INCORRECT
        *3 CORRECT

        Do not leave any space between the front door front window frame moulding and door frame. Firmly hold together the 2 items while installing the rivet.

  2. INSTALL FRONT DOOR UPPER WINDOW FRAME MOULDING LH


    1. Install a nose piece to an air riveter or hand riveter.

    2. Insert the mandrel part of a new rivet into the nose piece.

    3. Using the riveter, install the front door upper window frame moulding as shown in the illustration.

      Tech Tips

      If the rivet cannot be cut, pull it once and cut it.

      A004Q09

      Note


      • A004RW4E67
        *1 INCORRECT
        *2 Riveter
        *3 Mandrel
        *4 CORRECT

        Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

      • A004RNQE02
        *1 Riveter
        *2 INCORRECT
        *3 CORRECT

        Confirm that the rivets are seated properly against the front door upper window frame moulding.

      • Do not tilt the riveter when installing the rivet to the front door upper window frame moulding.

      • Do not leave any space between the rivet head and front door upper window frame moulding.

      • A004PZTE02
        *1 Riveter
        *2 INCORRECT
        *3 CORRECT

        Do not leave any space between the front door upper window frame moulding and door frame. Firmly hold together the 2 items while installing the rivet.

  3. INSTALL FRONT DOOR REAR WINDOW FRAME MOULDING LH


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape and butyl tape from the vehicle body surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new front door rear window frame moulding.


      1. Using a heat light, heat a new front door rear window frame moulding and the vehicle body surface.

      2. Remove the peeling paper from the face of the front door rear window frame moulding.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. A004TIKE02
        Text in Illustration
        *1 Double-sided Tape
        *2 Butyl Tape

        Attach the clip, double-sided tape and butyl tape to install the front door rear window frame moulding.

        Tech Tips

        Press the front door rear window frame moulding firmly to install it.

  4. INSTALL FRONT DOOR WEATHERSTRIP LH

    A004SND

    1. Attach the 2 clips to install the upper part of the front door weatherstrip.

  5. INSTALL FRONT DOOR GLASS RUN LH

    Click here

  6. INSTALL DOOR FRAME GARNISH LH

    Click here

  7. INSTALL FRONT DOOR BELT MOULDING LH

    Click here

  8. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH

    Click here

  9. INSTALL FRONT DOOR SERVICE HOLE COVER LH

    Click here

  10. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH

    Click here

  11. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  12. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

  13. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

    Click here

  14. INSTALL ASSIST GRIP COVER LH

    Click here

  15. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.