ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL HOUSE FRONT PLATE LH


    1. A004PU5

      Remove the 2 screws.

    2. A004SSS

      Remove the clip.

    3. Detach the guide and remove the rear wheel house front plate LH as shown in the illustration.

  2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. Remove the 3 screws.

      A004QYRE02
      Text in Illustration
      *1 Grommet *2 Retainer

    2. Remove the 7 retainers.

    3. Using a thin-bladed screwdriver, remove the grommet.

    4. A004SMO

      Remove the 2 screws.

    5. A004R6GE02
      Text in Illustration
      *a Protective Tape

      Put protective tape around the body rocker panel moulding assembly LH.

    6. Detach the 8 clips and remove the body rocker panel moulding assembly LH.

      A004NKW