FRONT DOOR BELT MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR BELT MOULDING LH

    A004TOU

    1. Attach the 8 claws to install the front door belt moulding.

  2. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH

    Click here

  3. INSTALL FRONT DOOR SERVICE HOLE COVER LH

    Click here

  4. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH

    Click here

  5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  6. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

  7. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

    Click here

  8. INSTALL ASSIST GRIP COVER LH

    Click here

  9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.