TIRE PRESSURE WARNING RECEIVER(for Wagon) INSTALLATION

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. A004TBS

      Connect the connector.

    2. Insert the 2 guides and install the tire pressure warning ECU and receiver with the bolt.

      Torque:
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REGISTRATION OF TRANSMITTER ID

    Click here

  5. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  6. PERFORM INITIALIZATION

    Click here