TIRE PRESSURE WARNING RECEIVER(for Wagon) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER


    1. A004O8H

      Disconnect the connector.

    2. Remove the bolt and the tire pressure warning ECU and receiver.