TIRE PRESSURE WARNING RECEIVER(for Sedan) INSTALLATION

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. A004MQ7

      Connect the connector.

    2. Insert the guide and install the tire pressure warning ECU and receiver with the bolt.

      Torque:
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

  2. INSTALL NO. 1 ROOM PARTITION BOARD

    Click here

  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

  4. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  5. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

    Click here

  6. INSTALL REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REGISTRATION OF TRANSMITTER ID

    Click here

  9. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  10. PERFORM INITIALIZATION

    Click here