REAR TRAILING ARM INSTALLATION

PROCEDURE


  1. INSTALL REAR TRAILING ARM ASSEMBLY

    A004PM3E02

    1. Install the trailing arm to the axle carrier and suspension member with the 4 bolts.

      Torque:
      for bolt A
      200 N*m  { 2039 kgf*cm, 148 ft.*lbf }
      for bolt B
      90 N*m  { 918 kgf*cm, 66 ft.*lbf }

  2. TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY LH


    1. for Turnbuckle Type:


      1. A004MU3

        Temporarily install the rear No. 1 suspension arm to the suspension member with the bolt and nut.

    2. for Cam Type:


      1. A004SDB

        Using the rear suspension toe adjust cam sub-assembly, No. 2 camber adjust cam and nut, temporarily install the rear No. 1 suspension arm assembly to the rear suspension member sub-assembly.

        Note


        • Insert the rear suspension toe adjust cam sub-assembly from the rear of the vehicle.

        • Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

  3. CONNECT PARKING BRAKE CABLE

    Click here

  4. CONNECT SKID CONTROL SENSOR WIRE

    Click here

  5. STABILIZE SUSPENSION

    Click here

  6. TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY LH


    1. for Turnbuckle Type:


      1. A004MU3

        Tighten the bolt and nut of the rear No. 1 suspension arm.

        Torque:
        90 N*m  { 918 kgf*cm, 66 ft.*lbf }

        Note

        Since a stopper nut is used, tighten the bolt.

    2. Cam Type:


      1. A004PW5E02
        Text in Illustration
        *a Matchmarks

        Align the matchmarks on the No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear suspension member sub-assembly.

      2. Fully tighten the nut to install the rear No. 1 suspension arm assembly.

        Torque:
        100 N*m  { 1020 kgf*cm, 74 ft.*lbf }

        Note

        Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

  7. INSTALL REAR WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  8. INSPECT AND ADJUST REAR WHEEL ALIGNMENT


    1. Inspect and adjust the rear wheel alignment Click here.

  9. ADJUST HEADLIGHT ASSEMBLY


    1. for Halogen Headlight:

      Adjust the headlight assembly Click here.

    2. for LED Headlight:

      Adjust the headlight assembly Click here.