REAR TRAILING ARM REMOVAL

PROCEDURE


  1. REMOVE REAR WHEEL

  2. DISCONNECT PARKING BRAKE CABLE

    Click here

  3. DISCONNECT SKID CONTROL SENSOR WIRE

    Click here

  4. DISCONNECT REAR NO. 1 SUSPENSION ARM ASSEMBLY LH


    1. for Turnbuckle Type:


      1. A004MU3

        Remove the bolt and nut, and disconnect the rear No. 1 suspension arm from the suspension member.

        Note

        Since a stopper nut is used, loosen the bolt.

    2. for Cam Type:


      1. A004PW5E02
        Text in Illustration
        *a Matchmarks

        Place matchmarks on the No. 2 camber adjust cam, rear suspension toe adjust cam sub-assembly and rear suspension member sub-assembly.

      2. Remove the nut, No. 2 camber adjust cam and rear suspension toe adjust cam sub-assembly.

        Note

        Hold the rear suspension toe adjust cam sub-assembly while rotating the nut.

      3. Separate the rear No. 1 suspension arm assembly from the rear suspension member sub-assembly.

  5. REMOVE REAR TRAILING ARM ASSEMBLY

    A004T2X

    1. Remove the 4 bolts and trailing arm from the axle carrier and suspension member.