REAR AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY LH


    1. Remove the disc brake cylinder assembly LH Click here.

  2. REMOVE REAR DISC

    Click here

  3. REPLACE REAR AXLE HUB BOLT


    1. A004RTJE04
      Text in Illustration
      *1 Nut

      Temporarily install 2 nuts and 2 washers to 2 rear axle hub bolts as shown in the illustration.

    2. Using SST and a brass bar or an equivalent tool to hold the hub and bearing assembly, remove the rear axle hub bolt.

      SST
      09611-12010
    3. A004SCZE06
      Text in Illustration
      *1 Washer
      *2 Nut

      Install a washer and nut to a new rear axle hub bolt as shown in the illustration.

    4. Using a brass bar or an equivalent tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.

  4. INSTALL REAR DISC

    Click here

  5. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH


    1. Install the disc brake cylinder assembly LH Click here.