STEERING KNUCKLE INSTALLATION

PROCEDURE


  1. INSTALL STEERING KNUCKLE LH


    1. A004OAS

      Hold the front axle assembly in a vise between aluminum plates.

      Note

      When using a vise, do not overtighten it.

    2. Install the front brake dust cover to the steering knuckle.

    3. Install the front axle hub sub-assembly with the 4 bolts.

      Torque:
      96 N*m  { 979 kgf*cm, 71 ft.*lbf }

      Note

      Do not place the magnet rotor side of the hub and bearing so that it is facing downward, and do not allow the magnet rotor side to become damaged or contact foreign matter.

  2. INSTALL FRONT LOWER BALL JOINT


    1. Hold the front axle assembly in a vise between aluminum plates.

      Note

      When using a vise, do not overtighten it.

    2. A004N5Q

      Install the front lower ball joint to the front axle assembly with the nut.

      Torque:
      133 N*m  { 1356 kgf*cm, 98 ft.*lbf }

    3. Install a new cotter pin.

      Note

      If the holes for the cotter pin are not aligned, align the holes by tightening the nut as necessary up to an additional 60°.

  3. INSTALL FRONT AXLE ASSEMBLY LH

    Click here

  4. INSTALL FRONT NO. 1 SUSPENSION LOWER ARM SUB-ASSEMBLY LH

    Click here

  5. INSTALL TIE ROD END SUB-ASSEMBLY LH

  6. INSTALL FRONT DISC

    Click here

  7. INSTALL DISC BRAKE CYLINDER ASSEMBLY LH

    Click here

  8. TEMPORARILY INSTALL FRONT AXLE SHAFT NUT LH

    Click here

  9. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH

  10. REMOVE FRONT DISC

  11. INSPECT FRONT AXLE HUB BEARING LOOSENESS

    Click here

  12. INSPECT FRONT AXLE HUB RUNOUT

    Click here

  13. INSTALL FRONT DISC

    Click here

  14. INSTALL DISC BRAKE CYLINDER ASSEMBLY LH

    Click here

  15. INSTALL FRONT FLEXIBLE HOSE

    Click here

  16. INSTALL FRONT SPEED SENSOR LH

    Click here

  17. STAKE FRONT AXLE SHAFT NUT LH

    Click here

  18. INSTALL FRONT WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  19. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

    Click here

  20. CHECK SPEED SENSOR SIGNAL

    Click here