FRONT DRIVE SHAFT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A004RRF

      Check that there is no excessive play in the radial direction of the inboard joint and outboard joint.

    2. Check the front axle inboard joint boot and front axle outboard joint boot for damage.

    3. A004N14E02
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Check that the front axle inboard joint boot and front axle outboard joint boot are not stretched or contracted when the front drive shaft assembly is at the standard length.

      Length (A)
      Item Specified Condition
      for LH side 561.8 mm (1.84 ft.)
      for RH side 912.3 mm (2.99 ft.)

      Note

      Keep the front drive shaft assembly level during inspection.

      If the front axle inboard joint boot and front axle outboard joint boot are stretched or contracted, correct them.