FRONT DRIVE SHAFT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT DRIVE SHAFT


    1. A004OOZ

      Check that there is no severe play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no severe play in the radial direction of the inboard joint.

    4. Check the 2 boots for damage.

    5. A004NXDE06
      Text in Illustration
      *a for LH Side
      *b for RH Side

      Check that the 2 boots are not stretched or contracted when the drive shaft is at the standard length.

      Dimension (A)
      Engine Type Item Dimension
      1AD-FTV for LH side 549.8 mm (21.6 in.)
      for RH side 930.5 mm (36.6 in.)
      2AD-FTV and 2AD-FHV for LH side 555.2 mm (21.9 in.)
      RH side 929.5 mm (36.6 in.)

      If the boots are stretched or contracted, correct them.