CLUTCH ACCUMULATOR INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY


    1. A004OOC

      Install the clutch accumulator assembly to the transaxle assembly with the 3 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }
    2. A004R8P

      Connect the flexible hose with a new clip.

    3. Install the accumulator to flexible hose tube with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    4. Using a union nut wrench, connect the accumulator to flexible hose tube to the clutch accumulator assembly and flexible hose.

      Torque:
      15 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

    5. Using a union nut wrench, connect the clutch release cylinder to accumulator tube to the clutch accumulator assembly.

      Torque:
      15 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  2. INSTALL BATTERY CARRIER

    Click here

  3. INSTALL BATTERY TRAY

  4. INSTALL BATTERY

  5. INSTALL BATTERY CLAMP SUB-ASSEMBLY

    Click here

  6. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here

  7. INSTALL NO. 1 ENGINE UNDER COVER

    Click here

  8. INSTALL FRONT LOWER BUMPER ABSORBER

    Click here

  9. CONNECT CABLE TO POSITIVE BATTERY TERMINAL

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.