PROCEDURE
REMOVE FRONT LOWER BUMPER ABSORBER
REMOVE NO. 1 ENGINE UNDER COVER
REMOVE REAR ENGINE UNDER COVER LH
REMOVE REAR ENGINE UNDER COVER RH
DRAIN AUTOMATIC TRANSAXLE FLUID
REMOVE FRONT DRIVE SHAFT ASSEMBLY LH AND RH
Remove the front drive shaft LH and RH Click here.
REMOVE DRIVE SHAFT BEARING BRACKET
REMOVE TRANSAXLE CASE OIL SEAL LH
Using SST, tap out the transaxle case oil seal.
REMOVE TRANSAXLE CASE OIL SEAL RH
Using SST, tap out the transaxle case oil seal.
INSTALL TRANSAXLE CASE OIL SEAL LH
Using SST and a hammer, tap in a new transaxle case oil seal.
| Oil seal driven in depth |
|---|
| -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) |
Note
Check that the oil seal is installed in the correct direction.
Coat the lip of the transaxle case oil seal with MP grease.
INSTALL TRANSAXLE CASE OIL SEAL RH
Using SST and a hammer, tap in a new transaxle case oil seal.
| Oil seal driven in depth |
|---|
| -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) |
Note
Check that the oil seal is installed in the correct direction.
Coat the lip of the transaxle case oil seal with MP grease.
INSTALL DRIVE SHAFT BEARING BRACKET
INSTALL FRONT DRIVE SHAFT ASSEMBLY LH AND RH
Install the front drive shaft LH and RH Click here.
ADD AUTOMATIC TRANSAXLE FLUID
Add automatic transaxle fluid Click here.
INSTALL REAR ENGINE UNDER COVER RH
INSTALL REAR ENGINE UNDER COVER LH
INSTALL NO. 1 ENGINE UNDER COVER
INSTALL FRONT LOWER BUMPER ABSORBER