PARK / NEUTRAL POSITION SWITCH INSTALLATION

PROCEDURE


  1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A004OS8

    1. Install the park/neutral position switch to the control shaft.

    2. Temporarily install the 2 bolts.

    3. Temporarily install the control shaft lever.

    4. A004QL1E01

      Turn the lever clockwise until it stops, and then turn it counterclockwise 2 notches.

    5. Remove the control shaft lever.

    6. A004NHQE01

      Align the protrusions of the park/neutral position switch.

    7. Hold the switch in that position and tighten the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
      Text in Illustration
      *1 Protrusion
    8. A004RG4

      Install the control shaft lever and washer to the control shaft with the nut.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

    9. Connect the park/neutral position switch connector.

  2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

    A004SCY

    1. Connect the transmission control cable to the control shaft lever with the nut.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  3. INSPECT SHIFT LEVER POSITION

    Click here

  4. ADJUST SHIFT LEVER POSITION

    Click here

  5. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION

    Click here

  6. INSTALL AIR CLEANER BRACKET

    A004PJG

    1. Install the air cleaner bracket with the 3 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 ft.*lbf }

  7. INSTALL FUEL FILTER SUPPORT

    A004O70

    1. Install the fuel filter support with the 4 bolts.

      Torque:
      18 N*m  { 178 kgf*cm, 13 ft.*lbf }

    2. Attach the connector clamp to the fuel filter support.

    3. A004SO2

      Connect the fuel filter assembly to the fuel filter support with the 2 nuts.

      Torque:
      18 N*m  { 178 kgf*cm, 13 ft.*lbf }

    4. Attach the 2 wire harness clamps and connector clamp, and then connect the connector to connect the engine wire to the fuel filter support.

  8. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  9. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  10. INSTALL AIR CLEANER CAP AND HOSE

    Click here

  11. INSTALL NO. 1 ENGINE COVER

    Click here

  12. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    Click here