ENGINE STOP AND START ECU REMOVAL

PROCEDURE


  1. READ NUMBER OF STARTER OPERATIONS

    Click here

  2. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  6. REMOVE ECU INTEGRATION BOX RH (for LHD)

    A004Q72

    1. Disconnect each connector and clamp.

    2. Remove the 2 nuts, bolt and ECU integration box RH.

  7. REMOVE ENGINE STOP AND START ECU (for LHD)

    A004R6T

    1. Disengage the 2 claws to remove the engine stop and start ECU from the ECU integration box RH.

      Text in Illustration
      A004P4E Remove in this Direction

  8. REMOVE ENGINE STOP AND START ECU (for RHD)


    1. A004NEJ

      Remove the screw and disconnect the connector holder.

    2. A004S0D

      Disconnect the 3 connectors from the engine stop and start ECU.

    3. Remove the 2 bolts and engine stop and start ECU.