ATF TEMPERATURE SENSOR INSPECTION

PROCEDURE

1. INSPECT ATF TEMPERATURE SENSOR ASSEMBLY

   

   Text in Illustration

   *1	Component without harness connected (ATF Temperature Sensor Assembly)

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition THO1 - E2 Always 90 Ω to 156 kΩ THO1 - Body ground Always 10 kΩ or higher E2 - Body ground Always 10 kΩ or higher

      Tech Tips

      If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

      Resistance (Reference)
      ATF Temperature Specified Condition 10°C (50°F) 5 to 8 kΩ 25°C (77°F) 2.5 to 4.5 kΩ 110°C (230°F) 0.22 to 0.28 kΩ

      If the result is not as specified, replace the ATF temperature sensor assembly.