ATF TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT BUMPER ABSORBER LOWER


    1. A004MM2

      Remove the 2 clips.

    2. A004TE9

      Remove the 8 bolts.

    3. Detach the 2 hooks of the front lower bumper absorber from the installation holes on the body and remove the front lower bumper absorber.

  2. REMOVE NO. 1 ENGINE UNDER COVER


    1. A004PZL

      Remove the 11 clips and engine under cover.

  3. REMOVE REAR ENGINE UNDER COVER LH


    1. Remove the 5 clips and rear engine under cover LH.

  4. DRAIN AUTOMATIC TRANSAXLE FLUID

    Click here

  5. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH

    Click here

  6. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

    Click here

  7. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

    Click here

  8. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY

    A004R4RE32

    1. Disconnect the connector.

    2. Remove the 4 bolts, clamp and ATF temperature sensor from the valve body.

      Text in Illustration
      *1 Clamp
    3. A004UBZ

      Remove the O-ring from the ATF temperature sensor.