SPEED SENSOR INSTALLATION

PROCEDURE


  1. INSTALL SPEED SENSOR

    A004TQK

    1. Coat the 2 bolts with ATF.

    2. Install the speed sensor to the valve body with the 2 bolts.

      Torque:
      11 N*m  { 110 kgf*cm, 8 ft.*lbf }

    3. Connect the connector.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

    Click here

  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

    Click here

  4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

    Click here

  5. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT LH

    Click here

  6. ADD AUTOMATIC TRANSAXLE FLUID


    1. Add automatic transaxle fluid (See page AUTOMATIC TRANSMISSION / TRANSAXLE (U660E) > AUTOMATIC TRANSAXLE FUID > ADJUSTMENT).

  7. INSTALL REAR ENGINE UNDER COVER LH


    1. Install the rear engine under cover LH with the 5 clips.

  8. INSTALL NO. 1 ENGINE UNDER COVER


    1. Install the engine under cover with the 11 clips.

  9. INSTALL FRONT LOWER BUMPER ABSORBER


    1. Insert the 2 hooks of the front lower bumper absorber into the installation holes on the body to install the front lower bumper absorber.

    2. Install the 8 bolts.

    3. Install the 2 clips.