DRIVING SUPPORT ECU(for RHD) INSTALLATION

PROCEDURE


  1. INSTALL DRIVING SUPPORT ECU ASSEMBLY

    A004SLV

    1. Install the ECU with the bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • Do not use an ECU which has been dropped or subjected to any strong shocks.

      • When a new ECU is installed, perform initialization Click here.

    2. Connect the connector.

      Note


      • Do not twist the connectors of the driving support ECU when connecting them.

      • Do not apply more force than necessary to the connectors. If more than 98 N (10 kgf, 22 lbf) of force is applied to a connector, the connector or connector holder may be damaged.

  2. INSTALL COIN BOX ASSEMBLY

    Click here