CRUISE CONTROL MAIN SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY


    1. A004SRP

      Install the switch with the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    2. Connect the connector.

  2. INSTALL STEERING PAD

    Click here

  3. INSTALL LOWER NO. 2 STEERING WHEEL COVER

    Click here

  4. INSTALL LOWER NO. 3 STEERING WHEEL COVER

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.