CRUISE CONTROL MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT CRUISE CONTROL MAIN SWITCH ASSEMBLY


    1. Remove the cruise control main switch.

      A004MTYE22

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (ECC) - 3 (CCS) Neutral 1 MΩ or higher
      1 (ECC) - 3 (CCS) +RES 235 to 245 Ω
      1 (ECC) - 3 (CCS) -SET 617 to 643 Ω
      1 (ECC) - 3 (CCS) CANCEL 1509 to 1571 Ω
      1 (ECC) - 3 (CCS) Main Switch OFF 1 MΩ or higher
      1 (ECC) - 3 (CCS) Main Switch ON Below 2.5 Ω
      Text in Illustration
      *1

      Component without harness connected

      (Cruise Control Main Switch)

      		 - -

      • If the result is not as specified, replace the cruise control main switch assembly.