LANE DEPARTURE ALERT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Data List.

    5. Read the Data List according to the display on the GTS.

      PCS/LDA/RSA/LVN
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Lidar Detect Target Distance Displays distance of the highest priority object which is detected by Lidar / 0 to 51.0 m Measured distance to preceding vehicle

      • Displays 0 m when a preceding vehicle is not detected.

      • Displays the distance from the pre-crash safety city sensor (laser sensor) to the preceding vehicle.
      Headlight Type Displays headlight type / Halogen or LED

      Halogen: Vehicle equipped with halogen headlights

      LED: Vehicle equipped with LED headlights

      		 -
      Heater Connection Pre-crash safety city heater connection status / ON or OFF

      ON: Pre-crash safety city heater connected

      OFF: Pre-crash safety city heater not connected

      		 -
      Heater Activation Pre-crash safety city heater activation status / ON or OFF

      ON: Pre-crash safety city heater operating

      OFF: Pre-crash safety city heater not operating

      		 This item is not used for models without the pre-crash safety city heater
      PCS Buzzer Demand - - This item is displayed on the GTS but is not used
      Skid Control Buzzer Demand Displays meter buzzer condition / ON or OFF

      ON: Meter buzzer operating

      OFF: Meter buzzer not operating

      		 -
      RSA Equipped Information - - This item is displayed on the GTS but is not used
      RSA Fusion Control - - This item is displayed on the GTS but is not used
      Traffic Sign Speed Unit - - This item is displayed on the GTS but is not used
      Estimated Traffic Division - - This item is displayed on the GTS but is not used
      LVN Equipped Information - - This item is displayed on the GTS but is not used
      History of Blockage Displays whether there is camera and laser radar obstruction history / ON or OFF

      ON: Pre-crash safety city sensor (camera and laser radar) obstruction history exists

      OFF: Pre-crash safety city sensor (camera and laser radar) obstruction history does not exist

      		 -
      History of Low Voltage Displays whether there is low voltage history / ON or OFF

      ON: Pre-crash safety city sensor low voltage history exists

      OFF: Pre-crash safety city sensor low voltage history does not exist

      		 -
      History of High Voltage Displays whether there is high voltage history / ON or OFF

      ON: Pre-crash safety city sensor high voltage history exists

      OFF: Pre-crash safety city sensor high voltage history does not exist

      		 -
      History of Low Temperature Displays whether there is low temperature history / ON or OFF

      ON: Pre-crash safety city sensor low temperature history exists

      OFF: Pre-crash safety city sensor low temperature history does not exist

      		 -
      History of High Temperature Displays whether there is high temperature history / ON or OFF

      ON: Pre-crash safety city sensor high temperature history exists

      OFF: Pre-crash safety city sensor high temperature history does not exist

      		 -
      Blockage Status Displays whether there is a camera obstruction malfunction / ON or OFF

      ON: Pre-crash safety city sensor (camera) obstructed

      OFF: Pre-crash safety city sensor (camera) not obstructed

      		 -
      Low Voltage Status Displays whether there is a low voltage malfunction / ON or OFF

      ON: Pre-crash safety city sensor low voltage malfunction exists

      OFF: Pre-crash safety city sensor low voltage malfunction does not exist

      		 -
      High Voltage Status Displays whether there is a high voltage malfunction / ON or OFF

      ON: Pre-crash safety city sensor high voltage malfunction exists

      OFF: Pre-crash safety city sensor high voltage malfunction does not exist

      		 -
      Low Temperature Status Displays whether there is a low temperature malfunction / ON or OFF

      ON: Pre-crash safety city sensor low temperature malfunction exists

      OFF: Pre-crash safety city sensor low temperature malfunction does not exist

      		 -
      High Temperature Status Displays whether there is a high temperature malfunction / ON or OFF

      ON: Pre-crash safety city sensor high temperature malfunction exists

      OFF: Pre-crash safety city sensor high temperature malfunction does not exist

      		 -
      Lidar Blockage Status Displays whether laser radar is dirty / ON or OFF

      ON: Dirt on pre-crash safety city sensor (laser radar)

      OFF: No dirt on pre-crash safety city sensor (laser radar)

      		 -
      Control Mode Displays ECU control mode status / Normal or Check Mode - -
      PCS Operation State Retention Setting Displays availability of PCS operation retention setting when turning ignition switch from off to ON / ON or OFF

      ON: PCS operation status retention setting available

      OFF: PCS operation status retention setting unavailable

      		 -
      PCS Alarm Activation Distance Retention Setting 1 Displays availability of PCS alarm activation distance retention setting when turning pre-crash system cancel switch assembly from off to on / ON or OFF

      ON: PCS alarm activation distance retention setting available

      OFF: PCS alarm activation distance retention setting unavailable

      		 -
      PCS Alarm Activation Distance Retention Setting 2 Displays availability of PCS alarm activation distance retention setting when turning ignition switch from off to ON with pre-crash system cancel switch assembly on / ON or OFF

      ON: PCS alarm activation distance retention setting available

      OFF: PCS alarm activation distance retention setting unavailable

      		 -
      PCS Alarm Activation Distance Retention Setting 3 Displays availability of PCS alarm activation distance retention setting when turning ignition switch from off to ON with pre-crash system cancel switch assembly off / ON or OFF

      ON: PCS alarm activation distance retention setting available

      OFF: PCS alarm activation distance retention setting unavailable

      		 -
      The Number of DTCs Number of trouble codes / 0 to 255 Number of DTCs will be displayed -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Active Test.

    5. Perform Active Test according to the display on the GTS.

      Tech Tips

      The ignition switch must be turned to ON to proceed with the Active Test using the GTS.

      PCS/LDA/RSA/LVN
      Tester Display Test Part Control Range Diagnostic Note
      PCS Buzzer Request - - This item is displayed on the GTS but is not used
      Meter Buzzer Request Sounds meter buzzer ON/OFF Test possible with ignition switch ON, vehicle stopped
      Automatic High Beam Operates automatic high beam system ON/OFF Test possible with ignition switch ON, engine stopped (operation possible regardless of system restrictions such as vehicle speed, shift position)
      Heater Activate Request Operates pre-crash safety city heater ON/OFF

      • Test possible with ignition switch to ON, vehicle stopped

      • This item is not used for models without the pre-crash safety city heater