GLOW PLUG INSTALLATION

PROCEDURE

1. INSTALL GLOW PLUG ASSEMBLY

   

   
   

   1. Using SST, install the 4 glow plug assemblies.

      SST
      PZ4TB-04910-68

      Torque:

      18 N*m  { 178 kgf*cm, 13 ft.*lbf }

   2. Connect the 4 connectors to the glow plug assemblies.

2. CONNECT ENGINE WIRE

   
   

   1. Using a T25 "TORX" socket wrench, connect the engine wire with the screw.

3. INSTALL NO. 1 ENGINE COVER

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.