GLOW PLUG CONTROLLER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click here

  5. REMOVE BATTERY INSULATOR

  6. REMOVE BATTERY

  7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  8. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  9. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  10. REMOVE NO. 1 AIR CLEANER INLET


    1. A004PUD

      Detach the clip and remove the No. 1 air cleaner inlet.

  11. REMOVE NO. 2 AIR CLEANER INLET


    1. A004OJZ

      Remove the bolt and No. 2 air cleaner inlet.

  12. REMOVE GLOW PLUG CONTROLLER


    1. A004Q9H

      Remove the 2 bolts and glow plug controller.

    2. Disconnect the 4 connectors.

  13. REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET


    1. A004R0C

      Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.