OIL PUMP REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. DRAIN ENGINE OIL

    Click here

  3. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

    Click here

  4. REMOVE OIL PAN SUB-ASSEMBLY


    1. A004P3J

      Remove the 4 bolts from the oil pan sub-assembly.

    2. A004MRH

      Using an E10 "TORX" socket wrench, remove the 20 bolts from the oil pan sub-assembly.

    3. A004U9I

      Pry the oil pan sub-assembly at the locations shown in the illustration to remove the oil pan sub-assembly.

      Note

      Be careful not to damage the contact surfaces of the oil pan sub-assembly and cylinder block.

  5. REMOVE OIL STRAINER SUB-ASSEMBLY


    1. A004RFV

      Remove the 2 bolts and oil strainer sub-assembly.

  6. REMOVE OIL PUMP WITH VACUUM PUMP ASSEMBLY


    1. A004NH2

      Using an E10 "TORX" socket wrench, remove the 4 bolts from the oil pump with vacuum pump assembly.

    2. A004UCA

      Remove the oil pump drive chain sub-assembly from the oil pump drive shaft gear, and then remove the oil pump with vacuum pump assembly.

      Tech Tips

      Do not drop the oil pump drive chain sub-assembly into the gap between the rear gear case and cylinder block.

    3. Suspend the oil pump drive chain with a string or equivalent.

  7. REMOVE OIL PUMP DRIVE SHAFT GEAR


    1. A004MKUE03

      Using SST and a T45 "TORX" socket wrench, remove the bolt and oil pump drive shaft gear.

      SST
      09960-10010   ( 09962-01000, 09963-01000 )

  8. REMOVE OIL PUMP COVER


    1. A004N1F

      Detach the claw to remove the oil pump cover.