OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

   
   

   1. Install a new gasket.

   2. Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      Torque:

      28 N*m  { 280 kgf*cm, 20 ft.*lbf }

   3. Connect the engine oil pressure switch connector.

2. INSPECT FOR OIL LEAK

   Click here

3. INSPECT ENGINE OIL LEVEL

   Click here

4. INSTALL RADIATOR SUPPORT OPENING COVER

   Click here

5. INSTALL NO. 1 ENGINE COVER

   Click here

6. INSTALL NO. 1 ENGINE UNDER COVER

   Click here