OIL PRESSURE SWITCHING VALVE INSTALLATION

PROCEDURE


  1. INSTALL OIL PRESSURE SWITCHING VALVE ASSEMBLY


    1. A004SRSE01
      Text in Illustration
      *1 O-Ring

      Apply a light coat of engine oil to the O-ring of the oil pressure switching valve.

    2. Install the oil pressure switching valve with the bolt.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

      Note

      Make sure that the O-ring is not cracked or jammed when installing the oil pressure switching valve.

    3. Connect the oil pressure switching valve connector and attach the wire harness clamp.

  2. ADD ENGINE OIL

    Click here

  3. INSPECT FOR OIL LEAK

    Click here

  4. INSPECT ENGINE OIL LEVEL

    Click here

  5. INSTALL ENGINE UNDER COVER

    Click here