THERMOSTAT INSTALLATION

PROCEDURE


  1. INSTALL THERMOSTAT


    1. Install a new gasket to the thermostat.

    2. A004TU2E03
      *1 Jiggle Valve

      Install the thermostat with the jiggle valve facing upward.

      Tech Tips

      The jiggle valve may be set to within 10° on either side of the prescribed position.

  2. INSTALL WATER INLET


    1. Install the water inlet with the 3 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }
  3. INSTALL NO. 4 WATER BY-PASS PIPE


    1. Apply soapy water to a new O-ring and install it to the by-pass pipe.

    2. A004QUQ

      Install the No. 4 water by-pass pipe with the bolt.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }
  4. CONNECT NO. 2 RADIATOR HOSE

  5. CONNECT WATER BY-PASS HOSE

    Click here

  6. ADD ENGINE COOLANT

    Click here

  7. INSPECT FOR COOLANT LEAK

    Click here

  8. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here

  9. INSTALL ENGINE UNDER COVER

    Click here

  10. INSTALL FRONT LOWER BUMPER ABSORBER

    Click here