DIFFERENTIAL PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL DIFFERENTIAL PRESSURE SENSOR

   
   

   1. Install the 2 No. 1 vacuum transmitting hoses to the differential pressure sensor.

   2. Connect the 2 No. 1 vacuum transmitting hoses to the exhaust manifold converter sub-assembly.

   3. Using a T20 "TORX" socket wrench, install the differential pressure sensor with the screw.

      Torque:

      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

   4. Connect the differential pressure sensor connector and slide the white-colored lock to engage it securely.

2. INSTALL NO. 1 ENGINE COVER

   Click here

3. PERFORM INITIALIZATION

   
   

   1. Perform differential pressure learning value reset Click here.