EXHAUST GAS TEMPERATURE SENSOR(for Sensor 2) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Sensor 2)

    Note

    If the exhaust gas temperature sensor is dropped, replace it with a new one.


    1. A004T6X

      Disconnect the exhaust gas temperature sensor connector.

    2. Detach the wire harness clamp.

    3. Disconnect the wire harness from the hook on the cylinder head cover side.

    4. A004TPI

      Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.