EXHAUST GAS TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE ENGINE ASSEMBLY

    Click here

  2. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

    Click here

  3. REMOVE MANIFOLD STAY

    Click here

  4. REMOVE NO. 2 MANIFOLD STAY

    Click here

  5. REMOVE NO. 2 EXHAUST MANIFOLD STAY

    Click here

  6. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

    Click here

  7. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Upper Side)

    Note

    If the sensor is dropped, replace it with a new one.


    1. A004OYN

      Detach the sensor connector clamp.

    2. Using a 14 mm union nut wrench, loosen the union nut.

    3. Remove the nut, clamp and sensor.

  8. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Lower Side)

    Note

    If the sensor is dropped, replace it with a new one.


    1. A004RL4

      Detach the sensor connector clamp.

    2. Using a 14 mm union nut wrench, remove the sensor.