EXHAUST FUEL ADDITION INJECTOR INSPECTION

PROCEDURE


  1. INSPECT EXHAUST FUEL ADDITION INJECTOR ASSEMBLY


    1. A004NDWE01
      Text in Illustration
      *1

      Component without harness connected

      (Exhaust Fuel Addition Injector)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 7.1 to 7.9 Ω

      Tech Tips

      The temperature indicated in "Condition" is the temperature of the exhaust fuel addition injector assembly.

      If the result is not as specified, replace the exhaust fuel addition injector assembly.