EXHAUST GAS TEMPERATURE SENSOR(for DPF) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. A004OXW

      Detach the sensor connector clamp.

    2. Using a 14 mm union nut wrench, remove the sensor.

  3. REMOVE ENGINE ASSEMBLY

    Click here

  4. REMOVE NO. 4 MANIFOLD CONVERTER INSULATOR

    Click here

  5. REMOVE MANIFOLD STAY

    Click here

  6. REMOVE NO. 2 MANIFOLD STAY

    Click here

  7. REMOVE NO. 2 EXHAUST MANIFOLD STAY

    Click here

  8. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

    Click here

  9. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. A004UBJ

      Detach the sensor connector clamp.

    2. Using a 14 mm union nut wrench, loosen the union nut.

    3. Remove the nut, clamp and sensor.

  10. REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. A004QUU

      Detach the sensor connector clamp.

    2. Using a 14 mm union nut wrench, remove the sensor.