FUEL TEMPERATURE SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note

When working on the fuel circuit, protect the generator assembly against dirt contamination.

Cover the generator assembly with suitable materials.

Failure to comply with this procedure may result in a generator assembly malfunction.

PROCEDURE


  1. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  2. REMOVE NO. 1 ENGINE COVER

    Click here

  3. REMOVE FUEL TEMPERATURE SENSOR


    1. A004O46

      Disconnect the fuel temperature sensor connector.

    2. Using a 17 mm (12P) deep socket wrench, remove the fuel temperature sensor from the fuel feed line.

    3. Remove the O-ring from the fuel temperature sensor.