EXHAUST FUEL ADDITION INJECTOR(for DPF) INSTALLATION

PROCEDURE


  1. INSTALL FUEL INJECTOR SEAL


    1. Install a new fuel injector seal to the exhaust fuel addition injector.

  2. INSTALL EXHAUST FUEL ADDITION INJECTOR ASSEMBLY

    Note

    If there is foreign matter on the installation surface of the exhaust fuel addition injector, be sure to clean the injector before installation.


    1. Install a new gasket, the exhaust fuel addition injector, the nozzle holder clamp, and the washer with the bolt.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

      Tech Tips

      Align the nozzle holder clamp with the cutouts of the injector as shown in the illustration.

      A004MWYE01
      Text in Illustration
      *1 Nozzle Holder Clamp

  3. INSTALL FUEL TUBE SUB-ASSEMBLY

    Click here

  4. INSTALL FUEL HOSE PROTECTOR


    1. Install the fuel hose protector with the bolt.

      Torque:
      21 N*m  { 209 kgf*cm, 15 ft.*lbf }

  5. INSTALL WIRE HARNESS CLAMP BRACKET


    1. Install the wire harness clamp bracket with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  6. CONNECT WIRE HARNESS


    1. Install the bolt to the fuel hose protector.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

    2. Connect the 5 connectors and attach the 3 wire harness clamps.

  7. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  8. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  9. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  10. INSTALL COWL TOP VENTILATOR LOUVER

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here

  13. INSPECT FOR FUEL LEAK

    Click here

  14. INSTALL NO. 1 ENGINE COVER

    Click here