FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A004N6GE01
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Sender Gauge Assembly)
      *b F (Upper)
      *c E (Lower)

      Check that the float moves smoothly between F and E.

    2. Inspect the fuel sender gauge assembly resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 3 Float level is F (upper) 13.5 to 16.5 Ω
        2 - 3 Float level is E (lower) 405.5 to 414.5 Ω

        If the result is not as specified, replace the fuel sender gauge assembly.