CAMSHAFT INSTALLATION

CAUTION / NOTICE / HINT

Note


  • When replacing the injectors (including shuffling the injectors between the cylinders), common rail, intake manifold or cylinder head, it is necessary to replace the injection pipes with new ones.

  • When replacing the fuel supply pump, common rail, intake manifold or cylinder head, it is necessary to replace the fuel inlet pipe with a new one.

PROCEDURE


  1. INSPECT VALVE LASH ADJUSTER ASSEMBLY

    Click here

  2. INSTALL VALVE LASH ADJUSTER ASSEMBLY


    1. Install the 16 valve lash adjusters to the cylinder head.

      Note

      Install the lash adjusters to their original positions.

  3. INSTALL NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY


    1. Install the 16 No. 1 valve rocker arms to the lash adjusters.

  4. INSTALL CAMSHAFT


    1. Install the No. 2 camshaft bearing cap.

    2. A004OSME09
      Text in Illustration
      *a Apply Engine Oil

      Apply clean engine oil to the cam of each camshaft, journals of the cylinder head and No. 1 valve rocker arms.

    3. A004QMKE01
      Text in Illustration
      *1 No. 3 Cylinder Cam Lobe
      *2 No. 1 Cylinder Cam Lobe

      Place the No. 2 camshaft on the cylinder head as shown in the illustration so that the No. 1 and No. 3 cylinder cam lobes face upward.

      Note

      A004PRBE08

      Before and after setting the camshaft and No. 2 camshaft on the cylinder head, check that the No. 1 valve rocker arm is firmly set to the valve lash adjuster.

    4. A004OKGE04
      Text in Illustration
      *1 No. 1 Valve Rocker Arm
      *2 Valve Stem
      *3 Valve Lash Adjuster
      *a CORRECT
      *b INCORRECT

      Align the camshaft and No. 2 camshaft timing mark (1 dot mark each).

    5. Place the camshaft on the cylinder head.

    6. A004R62
      Text in Illustration
      *1 Dot Mark

      Set the 8 No. 3 camshaft bearing caps and No. 1 camshaft bearing cap on the camshafts as shown in the illustration.

      Tech Tips

      Make sure of the marks and numbers on the camshaft bearing caps and place them in the proper position and direction.

    7. Partially tighten the 20 bolts.

    8. A004NSOE01
      Text in Illustration
      *1 Oil Pipe Seat

      Uniformly tighten the bolts in several steps, in the sequence shown in the illustration.

      Torque:
      for 1 to 16
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }
      for 17 to 20
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    9. Install the 2 oil pipe seats.

      Torque:
      17 N*m  { 173 kgf*cm, 13 ft.*lbf }

  5. INSTALL CAMSHAFT TIMING SPROCKET

    Click here

  6. INSTALL OIL PUMP DRIVE GEAR

    Click here

  7. INSTALL NO. 1 CHAIN VIBRATION DAMPER

    Click here

  8. INSTALL CHAIN TENSIONER SLIPPER

    Click here

  9. INSTALL NO. 1 CHAIN TENSIONER ASSEMBLY

    Click here

  10. INSTALL SUPPLY PUMP ASSEMBLY

    Click here

  11. INSTALL TIMING CHAIN COVER SUB-ASSEMBLY

    Click here

  12. INSTALL CRANKSHAFT PULLEY

    Click here

  13. INSTALL WATER PUMP ASSEMBLY

    Click here

  14. CONNECT CRANKSHAFT POSITION SENSOR WIRE HARNESS

    Click here

  15. INSTALL CAMSHAFT POSITION SENSOR

    Click here

  16. INSTALL OIL STRAINER SUB-ASSEMBLY

    Click here

  17. INSTALL OIL FILTER BRACKET

    Click here

  18. INSTALL OIL FILTER ELEMENT

    Click here

  19. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

    Click here

  20. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY

    Click here

  21. INSTALL NOZZLE HOLDER CLAMP SEAT

    Click here

  22. INSTALL OIL FILLER CAP SUB-ASSEMBLY

  23. INSTALL VENTILATION HOSE

    Click here

  24. INSTALL VACUUM TRANSMITTING HOSE ASSEMBLY

    Click here

  25. INSTALL VACUUM REGULATING VALVE ASSEMBLY

    Click here

  26. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

    Click here

  27. INSTALL INJECTOR ASSEMBLY

    Click here

  28. INSTALL NO. 1 NOZZLE LEAKAGE PIPE

    Click here

  29. INSTALL NO. 2 NOZZLE LEAKAGE PIPE

    Click here

  30. INSTALL NO. 3 FUEL HOSE

    Click here

  31. INSTALL FUEL TUBE SUB-ASSEMBLY

    Click here

  32. INSTALL FUEL HOSE PROTECTOR

    Click here

  33. INSTALL WATER INLET HOUSING

    Click here

  34. INSTALL NO. 4 WATER BY-PASS HOSE

  35. INSTALL NO. 2 WATER BY-PASS PIPE

    Click here

  36. INSTALL NO. 1 OIL COOLER BRACKET

    Click here

  37. INSTALL NO. 1 TURBO OIL PIPE

    Click here

  38. INSTALL NO. 3 WATER BY-PASS PIPE

    Click here

  39. INSTALL NO. 8 WATER BY-PASS HOSE

  40. INSTALL NO. 6 WATER BY-PASS HOSE

  41. INSTALL OIL COOLER ASSEMBLY

    Click here

  42. INSTALL WATER BY-PASS HOSE

    Click here

  43. INSTALL NO. 1 CYLINDER BLOCK INSULATOR

    Click here

  44. INSTALL INTAKE MANIFOLD

    Click here

  45. INSTALL NO. 2 INTAKE MANIFOLD

    Click here

  46. INSTALL ENGINE COVER BRACKET

    Click here

  47. INSTALL GAS FILTER BRACKET

    Click here

  48. INSTALL NO. 1 GAS FILTER

    Click here

  49. INSTALL DIESEL TURBO PRESSURE SENSOR

    Click here

  50. INSTALL INTAKE MANIFOLD INSULATOR

    Click here

  51. INSTALL COMMON RAIL ASSEMBLY

    Click here

  52. INSTALL NO. 4 FUEL HOSE

  53. INSTALL INJECTION PIPE SUB-ASSEMBLY

    Click here

  54. INSTALL FUEL INLET PIPE SUB-ASSEMBLY

    Click here

  55. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

    Click here

  56. INSTALL ELECTRIC EGR CONTROL VALVE ASSEMBLY

    Click here

  57. INSTALL NO. 2 EGR PIPE SUB-ASSEMBLY

    Click here

  58. INSTALL EGR VALVE BRACKET

    Click here

  59. CONNECT NO. 8 WATER BY-PASS HOSE

  60. INSTALL NO. 7 WATER BY-PASS HOSE

  61. INSTALL DIESEL THROTTLE BODY ASSEMBLY

    Click here

  62. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

    Click here

  63. INSTALL ENGINE MOUNTING BRACKET

    Click here

  64. INSTALL NO. 4 WATER BY-PASS PIPE

    Click here

  65. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

    Click here

  66. INSTALL NO. 1 IDLER PULLEY SUB-ASSEMBLY

    Click here

  67. INSTALL IDLER PULLEY COVER PLATE

    Click here

  68. INSTALL VACUUM PUMP ASSEMBLY

    Click here

  69. INSTALL GENERATOR ASSEMBLY

    Click here

  70. CONNECT ENGINE WIRE

    Click here

  71. INSTALL ENGINE ASSEMBLY

    Click here

  72. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.