DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. REMOVE REAR ENGINE UNDER COVER RH


    1. A004RW7

      Remove the 5 clips and under cover.

  3. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH


    1. A004RXS

      Remove the 4 bolts and front suspension member reinforcement.

  4. REMOVE FAN AND GENERATOR V BELT


    1. Using SST and a 22 mm wrench, rotate the tensioner pulley counterclockwise to loosen the belt tension. Then remove the belt.

      A004MYJE01
      *1 w/o Air Conditioning System:
      *2 w/ Air Conditioning System:
      SST
      09216-42010

      CAUTION:


      • Be careful as the wrench only fits loosely on the belt tensioner tool set point. The wrench may come off the set point and cause injuries.

      • Be careful that your hands do not become jammed between parts such as the belt, pulleys, etc.

      Note

      Make sure SST is installed as shown in the illustration. If not, SST and/or the belt may not be able to be removed.