ACCELERATOR PEDAL INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL ROD

   Note

   
   

   • Be careful not to drop the accelerator pedal rod.

   • Do not disassemble the accelerator pedal rod.

   • This accelerator pedal does not require lubrication.

     Do not apply oil or other lubrication to the accelerator pedal rod.

     If applied, the accelerator pedal rod must be replaced.

   
   

   1. Install the accelerator pedal rod with the 2 bolts.

      Torque:

      8.7 N*m  { 89 kgf*cm, 77 in.*lbf }

   2. Connect the connector.