DIESEL THROTTLE BODY REMOVAL

PROCEDURE


  1. REMOVE RADIATOR ASSEMBLY

    Click here

  2. REMOVE WIRE HARNESS CLAMP BRACKET


    1. A004NVG

      Detach the 2 clamps.

    2. A004OGY

      Using a T27 "TORX" socket wrench, remove the 2 bolts.

    3. Remove the bolt and wire harness clamp bracket.

  3. REMOVE NO. 3 AIR HOSE


    1. A004QIN

      Loosen the hose clamp and remove the No. 3 air hose from the air tube assembly.

  4. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A004MTD

      Detach the water by-pass hose assembly and radiator hose sub-assembly from the air tube assembly.

    2. A004R4L

      Detach the 2 wire harness clamps.

    3. A004QJU

      Disconnect the intake air temperature sensor connector.

    4. A004Q2Y

      Disconnect the No. 7 engine wire connector and detach the clamp.

    5. A004QUD

      Using a T27 "TORX" socket wrench, remove the bolt and disconnect the air tube assembly from the cylinder block sub-assembly.

    6. A004PPF

      Using an E8 "TORX" socket wrench, remove the 3 bolts and diesel throttle body assembly with air tube assembly and gasket.

    7. Detach the 2 claws and remove the air tube assembly from the diesel throttle body assembly.

    8. Remove the gasket from the air tube assembly.

    9. A004TXP

      Disconnect the diesel throttle body assembly connector.