AUDIO AND VISUAL SYSTEM(for Radio and Display Type) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

PROCEDURE


  1. CHECK IF A PROPER CD IS INSERTED


    1. Make sure that the CD is an audio CD or a CD with an MP3, WMA or ACC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      The CD is normal.

      Tech Tips


      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs with adhesive paper labels should not be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3, WMA and ACC files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.


    NG

    CHANGE CD

    OK

  2. CHECK THAT CD IS INSERTED PROPERLY


    1. Check whether or not the CD is inserted upside down.

      OK
      CD is properly inserted.

    NG

    SET CD PROPERLY

    OK

  3. CLEAN CD AND RECHECK


    1. A004THN

      Check for dirt on the CD surface.

      OK
      Dirt is on the CD surface.

      Note

      Do not use a conventional record cleaner or antistatic preservative.

      Tech Tips

      If the CD is dirty, clean the CD by wiping the CD surface radially with a soft cloth.


    OK

    END (CD IS DIRTY)

    NG

  4. REPLACE CD AND RECHECK


    1. Replace the CD with a known good one and check that the same trouble does not occur.

      OK
      Same trouble does not occur.

    OK

    END (CD IS DEFECTIVE)

    NG

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here