AUDIO AND VISUAL SYSTEM(for Radio and Display Type) CD Sound Skips

PROCEDURE

1. CHECK CD

   
   

   1. 

      Check the CD.

      OK
      The CD is clean.

      Note

      Do not use a conventional record cleaner or antistatic preservative.

      Tech Tips

      If the CD is dirty, clean the CD by wiping the CD surface radially with a soft cloth.

   
   

   NG

   CLEAN CD

   OK

2. CHECK CD

   
   

   1. 

      Check that the CD is not deformed or cracked.

      OK
      No deformation or cracks on the CD

   
   

   NG

   END (CD IS DEFECTIVE)

   OK

3. CHECK OPERATION OF ANOTHER CD

   
   

   1. Check using another CD.

      
      

      1. Check if the problem recurs using another CD.

         OK
         The problem does not occur.

   
   

   OK

   END (CD IS DEFECTIVE)

   NG

4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

   
   

   1. Check the radio and display receiver assembly installation condition.

      
      

      1. Check that the radio and display receiver assembly is properly installed.

         OK
         The radio and display receiver assembly is properly installed.

   
   

   OK

   REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

   NG

   REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY